JPF series pressure sensor for coal mine industry

*Range:0-100MPa *Analogue output *Bear 500VAC insulation *Intrinsically Safe Explosion Proof

JPF Series Pressure Sensor for Coal Mining Industry

General Description:

The JPF60 series pressure sensor is used for measuring hydraulic pressure under rough conditions. The 

pressure port is one piece stainless steel construction, there is no welds , no o ring, no oil filled. The sensor is used

silicon strain technology to get the high output with the thicker diaphragm.

 

Features:

Digital temperature and pressure calibrated through I C interface Special seal design for mining applicationPressure range: up to 0~200MPa High Accuracy:±0.5%FS(BFSL)Output: 0.5~4.5V @12V supply-40~125C operating temperature Intrinsically safe design

Technical Specification:

 Media compatible with 17-4 stainless steel

Pressure port material: 17-4 PH stainless steelHousing: 304 stainless steel Snubber (inside the port): 304 stainless steel Pressure range: 0~60MPa, 0~100MPa, 0~150MPa, 0~200MPa(other pressure range is available)Power Supply: 12V Output: 0.5~4.5V (other output type is available) Supply  Current: 2mA Compensation Temperature Range: 0~70°C Operating temperature: -40~125°C Accuracy (combined linearity, hysteresis, & repeatability): ±0.5%FS Pressure overload: 2x rated pressure Long term stability (1 year): ±0.25% of FS, TYPICAL Dielectric test: <1 mA @ 500VAC /1min Minimum resistance between transducer body & any wire: 1M Ohms @25 VDCOver voltage protection: 30 VDC 

Application:

For the mining approved using,the brass housing is needed.

JPF series pressure sensor for coal mine industry